| Analog Audio Inputs: |
6 mic-level, 2
balanced line- or mic-level |
| 8 female Euroblock connectors,
5.0mm, panel-mount |
| Screw terminals: Audio +; Audio -;
Ground |
| 8 male Euroblock connectors supplied in box |
| A/D Conversion: |
48kHz, 24-bit |
| Gain Settings: | +16dB to +64dB (10 settings) |
| 6-position DIP switch, per channel |
| Max. Input Level: |
Mic: -2dBu; Line: +18dBu |
| Stereo Operation: |
Stereo Link, per channel pair; Two-position switch (Normal, Link) |
| ADAT®: |
1 ADAT In, 48kHz, 8 channels routed to A-
Net Out, Channels 9-16 |
| 1 ADAT Out, 48kHz, 8 channels routed
from analog inputs |
| Input Impedance: | Channels 1-2,
without pad: 2.48k ohms Channels 1-2, with pad: 5.63 ohms Channels 3-8:
2.68k ohms |
| Freq. Response: |
4Hz-22kHz +0.2dB/-
3db |
| THD +N: | < 0.003% |
| Crosstalk: |
-90dB |
Signal to Noise:
(unweighted) | A/D: -105dB |
| Low Cut Filter: |
-
3dB @ 85Hz, -18dB per octave |
| Phantom Power: | +48
volts, per channel |
| Pad: |
20dB, switchable, Channels 1
and 2 only |
| Mic Input : | EIN (Equivalent
Input Noise): -128dBu |
| (Rs = 150 ohms, 20kHz BW, Gain =
+60dB) |
| CMRR (Common Mode Rejection Ratio): 80dB @ 120Hz
(Gain = +60dB) |
| Bit Error Rate (BER): |
10-12 |
| Pro16® A-Net®: | Out: 1; Expansion: 1; EtherCon®
connectors |
| A-Net Expansion combines two A-Net streams (32
channels of audio) onto one Cat-5e cable |
| Uses unshielded Cat-5e
UTP (or better) cable |
| Latency: |
<0.880 msec (measured
from analog input to analog output) |
| Power Supply: |
Internal, universal switching type; IEC jack |
| Voltage: |
100-240VAC, 50-60Hz, 60W; Fuse: 250VAC, F4AL |
|
Dimensions: | 19 in. (482.6 mm) wide x 9.25 in. (243.9 mm) deep; 1U
high |
| Weight: |
8 lbs (3.63 kg) |