{"id":921,"date":"2014-03-12T12:30:45","date_gmt":"2014-03-12T16:30:45","guid":{"rendered":"http:\/\/www.aviom.com\/aviomblog\/?p=921"},"modified":"2014-03-12T14:10:02","modified_gmt":"2014-03-12T18:10:02","slug":"picking-in-ear-monitors","status":"publish","type":"post","link":"https:\/\/www.aviom.com\/blog\/picking-in-ear-monitors\/","title":{"rendered":"Choosing In-Ear Monitors"},"content":{"rendered":"

\"picking-in-ears_960\"<\/a><\/p>\n

We are often asked what in-ear monitors we would recommend for use with Aviom Personal Mixers.<\/p>\n

While we can\u2019t recommend one specific brand or another, we can offer you some guidelines to help you make a choice that works for you.<\/p>\n

Six Factors to Consider When Choosing In-Ears<\/h2>\n

#1 In-Ear Monitors \u2260 iPod Earbuds<\/h3>\n
\"You<\/a>

You may love your iPod earphones, but don’t expect to get great results with them on stage.<\/p><\/div>\n

Earphones that are designed for casual listening with your iPod (or other personal listening device) are generally not great choices for using on stage. The biggest issue is that they\u2019re not designed to block out loud ambient sounds found on most stages (even ones where everyone is using in-ears so there are no wedges) or deal with the loud transients that a live mix often brings. Often, you\u2019ll turn them up too loud to make up for the lack of isolation, and you\u2019ll lose clarity and risk serious damage to your ears. $30 earphones just aren\u2019t going to perform very well on stage, and economizing here is not a great choice.<\/p>\n

(The nice thing, though, is that you may find the in-ear monitors you get for playing live also sound great with your iPod, especially in a loud environment like an airplane.)<\/p>\n

#2 Wired or Wireless<\/h3>\n

Lots of people assume at first that all in-ear monitors are wireless because that\u2019s what you see most often on professional concert stages and on TV. But the choice of earphone is really independent of the decision to go wired or wireless, and many earphone manufacturers don\u2019t even sell wireless transmitter\/receiver units. But you can certainly connect their earphones to other manufacturers’ wireless units.<\/p>\n

\"Wireless<\/a>

Wireless in-ears are great for performers who need to move around but may be an unnecessary expense for others. Either way, picking earphones and picking a wireless rig are separate choices.<\/p><\/div>\n

There’s no question that, for many musicians, not being tethered by a wire is incredibly liberating and for performers\u2014especially lead singers\u2014who move around a lot, a wired system simply won\u2019t work. Remember, though, that the wireless link adds cost and complexity, and that being wireless is next to useless for some musicians. Most drummers, for instance, aren’t going to get a lot of benefit from being wireless. Neither is a guitarist whose guitar isn’t also wireless.<\/p>\n

So our advice is to go wireless where it really matters and, for the musicians for whom it won’t make a difference, spend that money on getting better quality earphones.<\/p>\n

#3 Universal Fit or Custom Molded<\/h3>\n

Universal fit in-ears (sometimes called “generic fit”) have replaceable foam or soft rubber tips that adapt to the shape of your ears after you insert them. (Tip: Be sure to compress the foam before you insert them so you get the earphone nozzle properly in your ear canal and the tip can then expand in your ear to seal out ambient sound.)<\/p>\n

\"An<\/a>

An audiologist taking an ear impression that will be used to make custom-molded in-ears.<\/p><\/div>\n

Custom-molded in-ears place the speaker driver(s) and nozzle in a case that’s molded to the exact shape of your ear. This requires that you make a visit to an audiologist, who will make an impression of your ear that\u2019s then used by the manufacturer of the earphone to make the case that holds the elements of the earphone itself.<\/p>\n

So how do you choose? Not surprisingly, universals are, as a general rule, substantially less expensive than customs of a similar quality. Because universals can be shared, they’re a great solution for churches where gear is shared among multiple ensembles and where musicians sub in and out (just be sure to keep a supply of clean foam\/rubber tips on hand). Customs can provide superior comfort (especially over extended wearing), better isolation, and improved sound quality. Which is not say that universals can\u2019t sound great too. They can.<\/p>\n

#4 How Many Drivers<\/h3>\n
\"A<\/a>

A look inside a pair of multi-driver, custom-molded in-ears.<\/p><\/div>\n

As with full sized speakers, having more drivers generally means getting better sound because each driver is handling a narrower frequency range or, combined, the drivers are covering a wider frequency range with more efficiency and clarity. So generally speaking, multi-driver models will sound better than similar single-driver models, and the more drivers an earphone has, the more potential it has to sound fantastic. That, of course, doesn’t mean that every multi-driver earphone is going to sound good or better than every single-driver model or that every three-driver model will sound better than a dual-driver.<\/p>\n

#5 Audio Specs<\/h3>\n

You’ll generally see four different technical specs with earbuds: amount of isolation, frequency response, sensitivity, and impedance.<\/p>\n

Amount of isolation<\/strong> (sometimes called noise attenuation or reduction) is measured in dB (decibels) and indicates how much outside sound is blocked by the earpiece itself; a higher number means more sound is being blocked. That means you’ll hear your monitor mix with less interference from the outside world.<\/p>\n

Frequency response<\/strong> tells you what pitches (frequencies) the earphones are capable of producing. Human hearing spans 20Hz to 20kHz, so the more of that range that’s covered, the better.<\/p>\n

Sensitivity<\/strong> and impedance<\/strong> both translate into volume: the lower the sensitivity and the higher the impedance, the more power you’ll require from the headphone amp\/personal mixer\/wireless pack to produce a given volume.<\/p>\n

Generally speaking, there’s no need to worry about small differences in impedance specs, as most in-ear monitors are similarly fairly low impedance (typically in the neighborhood of 20 or 30 ohms). Note, however, that some headphones (particularly some high end studio headphones) have much higher impedance values, sometimes well north of 100 ohms; these devices will require noticeably more power from the device they’re connected to in order to produce similar volumes.<\/p>\n

Sensitivity specs indicate how much volume (measured in dB) a speaker (in this case, the speakers in the in-ear monitor) will produce when driven with a specified amount of power. As with impedance, you don’t really need to worry about small variations in the sensitivity specs from one model to another. And remember that sensitivity and impedance\u00a0both\u00a0<\/em>affect the amount of power required to produce a certain amount of volume, so consider the two specs together rather than in isolation.<\/p>\n

More important than all these specs, though, is how do the earphones\u00a0sound<\/em>. Basic frequency response specs, for instance, only tell you which frequencies the device can produce; a simple range, though, doesn’t give you any info about the curve of that response, which translates into the character of the sound. Product descriptions will often give you some guidance about the character of the sound (particularly, it seems, how much low end is emphasized), but unfortunately there’s really only one true way to definitively evaluate how a given pair of earphones sound: listening.<\/p>\n

One final note on audio specs: be wary of earphones that\u00a0don’t<\/em> include audio specs. That may be a sign that the earphones you’re looking at are really designed for casual personal listening (where specs may not matter as much) and won’t perform very well with the unique demands of live music.<\/p>\n

#6 Personal Preference<\/h3>\n

Lastly, be sure to consider personal preferences. That goes for comfort, sound, and even look. We’re all different, and we’re not all going to love the same in-ear monitors. So don\u2019t expect one size to fit all. Even with universal fit earphones.<\/p>\n

The Bottom Line<\/h2>\n

It’s really important to invest in good in-ear monitors if you want to have a good in-ear experience. That’s even more true than it is for wedges, since your in-ears are basically all you’re going to hear (and you don’t have to wear a wedge monitor, so comfort matters more with in-ears too!). The most important piece of the equation is how good the earphones sound, so our advice is to get the best sounding in-ears you can and then add in the “extras” of custom molding and wireless. Remember that a great pair of universals will likely give you a better overall experience than a mediocre pair of wireless customs. And you can always add the wireless link later.<\/p>\n

Have a favorite in-ear monitor? Share it in the comments!<\/p>\n

 <\/p>\n","protected":false},"excerpt":{"rendered":"

We often get asked what in-ear monitors we recommend, and here are a few tips to help you make a choice that works for you.<\/p>\n","protected":false},"author":2,"featured_media":1026,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":[],"categories":[3],"tags":[5,7,6,58,8],"_links":{"self":[{"href":"https:\/\/www.aviom.com\/blog\/wp-json\/wp\/v2\/posts\/921"}],"collection":[{"href":"https:\/\/www.aviom.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.aviom.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.aviom.com\/blog\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/www.aviom.com\/blog\/wp-json\/wp\/v2\/comments?post=921"}],"version-history":[{"count":31,"href":"https:\/\/www.aviom.com\/blog\/wp-json\/wp\/v2\/posts\/921\/revisions"}],"predecessor-version":[{"id":1743,"href":"https:\/\/www.aviom.com\/blog\/wp-json\/wp\/v2\/posts\/921\/revisions\/1743"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.aviom.com\/blog\/wp-json\/wp\/v2\/media\/1026"}],"wp:attachment":[{"href":"https:\/\/www.aviom.com\/blog\/wp-json\/wp\/v2\/media?parent=921"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.aviom.com\/blog\/wp-json\/wp\/v2\/categories?post=921"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.aviom.com\/blog\/wp-json\/wp\/v2\/tags?post=921"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}